Dietary, socioeconomic, and maize handling practices associated with aflatoxin and fumonisin exposure among women tortilla makers in 5 departments in Guatemala.

Previous research has demonstrated human exposure to mycotoxins among Guatemalans, with high levels of mycotoxins being found in blood and urine samples as well as in maize for human consumption. Mishandling of crops such as maize during pre- and post-harvest has been associated with mycotoxin contamination. The overarching goal of this study was to identify risk factors for aflatoxin and fumonisin exposure in Guatemala. A cross-sectional survey of 141 women tortilla makers was conducted in the departments of Guatemala, Sololá, Suchitepéquez, Izabal, and Zacapa in February 2022. Maize and tortilla samples were collected and analyzed for aflatoxin B1 (AFB1) and fumonisin B1, B2, and B3 contamination (FB1, FB2, FB3). Urine samples were collected and analyzed for urinary FB1 (uFB1) contamination. A questionnaire was administered to collect data on sociodemographic characteristics, dietary intake of maize-based foods the week prior to the study, and maize handling practices. Descriptive statistics were used to describe common maize handling practices. A univariable analysis was conducted to identify predictors of low/high AFB1, total fumonisins, and uFB1. Multivariable logistic regression was used to calculate adjusted odds ratios (ORs) and 95% confidence intervals (CIs). During tortilla processing, a reduction in the AFB1 and total fumonisin levels was observed. The presence of AFB1 in maize was associated with department and mean total fumonisin level in maize (OR: 1.705, 95% CI: 1.113-2.613). The department where the tortilleria was located was significantly associated with the presence of fumonisins in tortillas. Increased consumption of Tortrix was significantly associated with the presence of FB1 in urine (OR: 1.652, 95% CI: 1.072-2.546). Results of this study can be used in the development and implementation of supply chain management practices that mitigate mycotoxin production, reduce food waste and economic loss, and promote food security.

Nondestructive and Rapid Screening of Aflatoxin-Contaminated Single Peanut Kernels Using Field-Portable Spectroscopy Instruments (FT-IR and Raman).

A nondestructive and rapid classification approach was developed for identifying aflatoxin-contaminated single peanut kernels using field-portable vibrational spectroscopy instruments (FT-IR and Raman). Single peanut kernels were either spiked with an aflatoxin solution (30 ppb-400 ppb) or hexane (control), and their spectra were collected via Raman and FT-IR. An uHPLC-MS/MS approach was used to verify the spiking accuracy via determining actual aflatoxin content on the surface of randomly selected peanut samples. Supervised classification using soft independent modeling of class analogies (SIMCA) showed better discrimination between aflatoxin-contaminated (30 ppb-400 ppb) and control peanuts with FT-IR compared with Raman, predicting the external validation samples with 100% accuracy. The accuracy, sensitivity, and specificity of SIMCA models generated with the portable FT-IR device outperformed the methods in other destructive studies reported in the literature, using a variety of vibrational spectroscopy benchtop systems. The discriminating power analysis showed that the bands corresponded to the C=C stretching vibrations of the ring structures of aflatoxins were most significant in explaining the variance in the model, which were also reported for Aspergillus-infected brown rice samples. Field-deployable vibrational spectroscopy devices can enable in situ identification of aflatoxin-contaminated peanuts to assure regulatory compliance as well as cost savings in the production of peanut products.

High yield production of cyanidin-derived pyranoanthocyanins using 4-vinylphenol and 4-vinylguaiacol as cofactors.

Pyranoanthocyanins are anthocyanin-derived pigments with vivid colors and enhanced stability, making them promising food colorants. We evaluated two 4-vinylphenols, decarboxylated p-coumaric (pCA) and ferulic acid (FA), as cofactors for pyranoanthocyanin formation. Cyanidin-3-glycosides from saponified black carrot were incubated with 4-vinylphenol or 4-vinylguaiacol in different anthocyanin-to-cofactor molar ratios (1:1-1:30) to form pyranoanthocyanins. Formation efficiency (45 °C, ≤96 h) was compared to their respective precursors at a 1:30 ratio. Composition changes were monitored using uHPLC-PDA-ESI-MS/MS. Pyranoanthocyanin yields with 4-vinylphenol (13.8-33.4%) were ∼12× higher than with pCA and yields with 4-vinylguaiacol (8.1-31.0%) were ∼6.5× higher than with FA. Molar ratios of 1:5 and 1:10 yielded significantly more pyranoanthocyanins. Pyranoanthocyanin formation with 4-vinylphenols followed first-order kinetics, whereas formation with hydroxycinnamic acids followed zero-order kinetics. Detection of intermediate compounds was consistent with a nucleophilic addition and aromatization formation mechanism. Overall, pyranoanthocyanin formation with 4-vinylphenols was more efficient than with hydroxycinnamic acids.

Thermal stability comparison between 10-catechyl-pyranoanthocyanins and anthocyanins derived from pelargonidin, cyanidin, and malvidin.

10-Catechyl-pyranoanthocyanins are pigments derived from nature formed by reacting an anthocyanin with caffeic acid. Here, we compared the thermal stability and formed degradation compounds of different 10-catechyl-pyranoanthocyanins. Pelargonidin-3-glucoside, cyanidin-3-glucoside, malvidin-3-glucoside, anthocyanins differing in the number of substitutions on the B-ring, and their corresponding 10-catechyl-pyranoanthocyanins were heated at 90 °C for 4.5 h at pH 3. Anthocyanin's color faded (ΔELab > 5) after only 0.5 h, and absorbance at λvis-max decreased by > 64 % after 4.5 h, with cyanidin-3-glucoside being the most stable. In contrast, 10-catechyl-pyranoanthocyanins color was heat stable (ΔELab < 5) with absorbance at λvis-max reduced by < 10 % after 4.5 h heating. A phenolic degradation compound formed in all samples, dependent on the parent pigment's B-ring substitutions. All 10-catechyl-pyranoanthocyanins produced the same colored degradation compound (λmax = 478 nm, m/z = 315), suggesting the B-ring was not attached. 10-Catechyl-pyranoanthocyanins displayed excellent thermal stability irrespective of the anthocyanin used for formation.

A novel handheld FT-NIR spectroscopic approach for real-time screening of major cannabinoids content in hemp.

A novel approach for rapid (15s) detection and quantification of predominant cannabinoids in hemp was developed using Fourier-transformed near-infrared spectroscopy (FT-NIR), enabling real-time and field-based applications. Hemp samples (n = 91) were obtained from certified online vendors, the OARDC Weed Lab, and a local Ohio farm. Reference data of major cannabinoids content were determined by uHPLC-MS/MS. Spectral data were collected by a miniaturized, battery-operated FT-NIR instrument, and combined with the reference data to generate partial least squares regression (PLSR) models. uHPLC-MS/MS analysis showed two samples had over 0.36% of Δ9-tetrahydrocannabinol (Δ9-THC), and 64% (32 out of 50) of online-bought hemp samples were not in compliance with their total cannabidiol (CBD) content declaration. PLSR prediction models showed excellent correlation (Rpre = 0.91-0.95) and a low standard error of prediction (SEP = 0.02-0.61%). This method could be used as an alternative to traditional methods for in-situ assessment of hemp quality.

Comparing the thermal stability of 10-carboxy-, 10-methyl-, and 10-catechyl-pyranocyanidin-3-glucosides and their precursor, cyanidin-3-glucoside.

Pyranoanthocyanins are vibrant, naturally derived pigments formed by the reaction of an anthocyanin with a cofactor containing a partially negatively charged carbon. This study compared the thermal stability and degradation products of 10-carboxy-pyranocyanidin-3-glucoside (pyruvic acid cofactor), 10-methyl-pyranocyanidin-3-glucoside (acetone cofactor), and 10-catechyl-pyranocyanidin-3-glucoside (caffeic acid cofactor) with their anthocyanin precursor to evaluate the role of the pyranoanthocyanin C10 substitution on stability. Pyranoanthocyanins exhibited absorbance half-lives ~2.1-8.6 times greater than cyanidin-3-glucoside, with ~15-52% of their original pigment remaining after 12 h of 90 °C heating at pH 3.0. 10-Methyl-pyranocyanidin-3-glucoside was the most stable (p < 0.01) based on UHPLC-PDA analysis, while 10-catechyl-pyranocyanidin-3-glucoside had the most stable color in part due to contribution from a colored degradation compound. Protocatechuic acid formed in all heated samples, which suggested a similar degradation mechanism among pigments. In conclusion, the C10 substitution impacted the extent of pyranoanthocyanin stability and the degradation compounds formed.

Influence of the Anthocyanin and Cofactor Structure on the Formation Efficiency of Naturally Derived Pyranoanthocyanins.

Pyranoanthocyanins are anthocyanin-derived pigments with higher stability to pH and storage. However, their slow formation and scarcity in nature hinder their industrial application. Pyranoanthocyanin formation can be accelerated by selecting anthocyanin substitutions, cofactor concentrations, and temperature. Limited information is available on the impacts of the chemical structure of the cofactor and anthocyanin; therefore, we evaluated their impacts on pyranoanthocyanin formation efficiency under conditions reported as favorable for the reaction. Different cofactors were evaluated including pyruvic acid, acetone, and hydroxycinnamic acids (p-coumaric, caffeic, ferulic, and sinapic acid) by incubating them with anthocyanins in a molar ratio of 1:30 (anthocyanin:cofactor), pH 3.1, and 45 °C. The impact of the anthocyanin aglycone was evaluated by incubating delphinidin, cyanidin, petunidin, or malvidin derivatives with the most efficient cofactor (caffeic acid) under identical conditions. Pigments were identified using UHPLC-PDA and tandem mass spectrometry, and pyranoanthocyanin formation was monitored for up to 72 h. Pyranoanthocyanin yields were the highest with caffeic acid (~17% at 72 h, p < 0.05). When comparing anthocyanins, malvidin-3-O-glycosides yielded twice as many pyranoanthocyanins after 24 h (~20%, p < 0.01) as cyanidin-3-O-glycosides. Petunidin- and delphinidin-3-O-glycosides yielded <2% pyranoanthocyanins. This study demonstrated the importance of anthocyanin and cofactor selection in pyranoanthocyanin production.

Invited review: Acid whey trends and health benefits.

In recent years, acid whey production has increased due to a growing demand for Greek yogurt and acid-coagulated cheeses. Acid whey is a dairy by-product for which the industry has long struggled to find a sustainable application. Bulk amounts of acid whey associated with the dairy industry have led to increasing research on ways to valorize it. Industry players are finding ways to use acid whey on-site with ultrafiltration techniques and biodigesters, to reduce transportation costs and provide energy for the facility. Academia has sought to further investigate practical uses and benefits of this by-product. Although modern research has shown many other possible applications for acid whey, no comprehensive review yet exists about its composition, utilization, and health benefits. In this review, the industrial trends, the applications and uses, and the potential health benefits associated with the consumption of acid whey are discussed. The proximal composition of acid whey is discussed in depth. In addition, the potential applications of acid whey, such as its use as a starting material in the production of fermented beverages, as growth medium for cultivation of lactic acid bacteria in replacement of commercial media, and as a substrate for the isolation of lactose and minerals, are reviewed. Finally, the potential health benefits of the major protein constituents of acid whey, bioactive phospholipids, and organic acids such as lactic acid are described. Acid whey has promising applications related to potential health benefits, ranging from antibacterial effects to cognitive development for babies to human gut health.

Copigmentation with Chlorogenic and Ferulic Acid Affected Color and Anthocyanin Stability in Model Beverages Colored with Sambucus peruviana, Sambucus nigra, and Daucus carota during Storage.

The food industry is looking for alternatives to synthetic colorants. Anthocyanins (ACNs) are suitable replacements due to their color characteristics and potential health benefits. The application of sauco (Sambucus peruviana, SP) as a potential source of ACN-based colorants was evaluated and compared to elderberry (Sambucus nigra, SN) and an extract from purple carrots (PC). Color and pigment stability were evaluated using a model beverage system during eight weeks of storage. Copigmentation with chlorogenic acid (CGA) and ferulic acid (FA) were also evaluated. SP ACNs provided darker and more intense colors than those obtained with SN but less intense than those obtained with PC. Addition of CGA and FA resulted in significantly darker colors with higher chroma in beverages colored with SP and SN but not in beverages colored with PC. Copigmentation with FA reduced monomeric pigment half-lives for all ACN sources but increased the chroma half-lives of beverages colored with SP and SN, from 23 to 49 weeks, and from 23 to 55 weeks, respectively. Analyses using liquid chromatography coupled to photodiode array detection and mass spectrometry showed that interaction between non-acylated ACNs and FA resulted in the formation of pyranoanthocyanins. Overall, ACNs from non-acylated sources such as SP, in combination with FA, showed potential for commercial food applications.

Growth of lactic acid bacteria in milk phospholipids enhances their adhesion to Caco-2 cells.

The mechanisms of bacterial adhesion to human cells involve several complex reactions and activation of genes and proteins. It has been reported that the food components in dairy matrices, such as sugar or salt, can decrease bacterial adhesion to Caco-2 cells. However, it has not been evaluated whether the bacteria grown in media supplemented with milk phospholipids (MPL) can increase or decrease the adhesion of these cells. The objective of this work was to evaluate the effects of MPL on the kinetic growth of lactic acid bacteria (LAB) and their functional characteristics as probiotics, expression of surface protein genes, and adherence to Caco-2 cells. Seven LAB strains isolated from various dairy products were characterized. Five of the tested LAB strains were able to grow in a chemically defined medium supplemented with MPL. Lactobacillus reuteri OSU-PECh-48 showed the highest growth rate and the greatest optical density. All of the strains tested showed tolerance to acidic conditions at pH 3.0 and to bile salts at 0.5 and 1% concentrations. Auto-aggregation and cell surface hydrophobicity ability were evaluated, with nonsignificant differences between the strains grown in MPL and without MPL. Gene expression of 6 surface proteins was evaluated in the presence or absence of MPL. Pediococcus acidilactici OSU-PECh-L and OSU-PECh-48 were the strains with highest relative expression of 5 of the 6 genes evaluated. Lactobacillus paracasei OSU-PECh-BA was the strain with the lowest level of expression of surface protein genes. Most of the bacteria tested had increased adhesion to Caco-2 cells after growth in MPL. The bacteria with the highest degrees of adhesion observed were Lactobacillus paracasei OSU-PECh-3B, Pediococcus acidilactici OSU-PECh-L, and Lactobacillus reuteri OSU-PECh-48. The genes Cnb and EF-Tu increased in expression in the presence of MPL in most of the LAB tested. The results obtained in this work demonstrate the high potential of these LAB strains for use as starters or beneficial cultures in fermentation of not only dairy products but also other food fermentation processes, with promising ability to increase residence time in the gut, modify the microbiome, and improve human health.

Monitoring Hydroxycinnamic Acid Decarboxylation by Lactic Acid Bacteria Using High-Throughput UV-Vis Spectroscopy.

Hydroxycinnamic acid (HCA) decarboxylation by lactic acid bacteria (LAB) results in the production of 4-vinylplenols with great impact on the sensorial characteristics of foods. The determination of LAB decarboxylating capabilities is key for optimal strain selection for food production. The activity of LAB strains from the Ohio State University-Parker Endowed Chair (OSU-PECh) collection potentially capable of synthesizing phenolic acid decarboxylase was evaluated after incubation with HCAs for 36 h at 32 °C. A high-throughput method for monitoring HCAs decarboxylation was developed based on hypsochromic shifts at pH 1.0. Out of 22 strains evaluated, only Enterococcus mundtii, Lactobacillus plantarum and Pediococcus pentosaceus were capable of decarboxylating all p-coumaric, caffeic and ferulic acids. Other strains only decarboxylated p-coumaric and caffeic acid (6), only p-coumaric acid (2) or only caffeic acid (1), while 10 strains did not decarboxylate any HCA. p-Coumaric acid had the highest conversion efficiency, followed by caffeic acid and lastly ferulic acid. Results were confirmed by HPLC-DAD-ESI-MS analyses, showing the conversion of HCAs into their 4-vinylphenol derivatives. This work can help improve the sensory characteristics of HCA-rich foods where fermentation with LAB was used during processing.